EVERBUILD INDUSTRIAL SUPERGLUE HV
igh viscosity formula for porous and non porous substrates where a slightly delayed set is required. For use on MDF, rubber, metals, PVCu and plastics. Viscosity at 25°C - 1500 cps. Set time 10 to 30 seconds.
Our Website's Are Secured By EV Extended SSL Encryption
All Our Deliverys Are Tracked
Returns Accepted (Terms & Conditions Apply)
EVERBUILD INDUSTRIAL SUPERGLUE HV is a high viscosity flash setting industrial adhesive based on advanced cyanoacrylate technology.
- Flash setting formulation, bonds to most porous and non porous surfaces in seconds.
- Fills gaps up to 0.25mm
- Single component adhesive
- 100% solvent free
- Economical in use
- Ensure surfaces are degreased prior to bonding.
- Ensure surfaces are close fitting. This adhesive will not bridge gaps.
- Do not use in applications involving constant water immersion.
- Do not use on bitumen or tar leaching products.
- As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.